Accessories and software Bronkhorst controllers, valves, etc.

Collectors of the Top-mount system series (with various mounting options), FLOW-SMS (for mounting on railway systems with sensor pressure modules), MANI-FLOW (collectors combine various functions in one compact device, can be combined with a control valve, shut-off valves, filters and other functional modules), IQ+FLOW (collectors of this series are combined with shut-off valves, filters and other functional modules).

The F-001 series valves consist of a module installed inside or on the base unit. Valves of the F-033, F-042 series are used for pressure up to 700 bar. The valves F-002A, F-003A, F-003B correspond to high flow rates, up to 500 nm3/h. They use a full Vary-P valve, as a pilot valve. The valves of the F-004 series are closed by means of a spring. Pressure design, allows you to smoothly control large flows at extremely low pressure. The valves of the C5I series have a high flow rate and a nominal pressure of up to 100 bar. The control valve can be used for gas flow. The manual valves of the FLOW-ADJUST series are designed for precise control of low flows of gas and liquids.

Fluid Portable Calibrators The portable gas flow and pressure calibrator is a lightweight device with a handle. containing a series of precisely calibrated digital measurement modules for flow or pressure control.

Liquid dosing systems. The use of flow regulators in the tasks of precise liquid dosing requires maintaining a constant pressure in the liquid vessel. In some cases, the fulfillment of this requirement for one reason or another is impossible or difficult. For such tasks, Bronkhorst High Tech offers an alternative solution - Liquid dosing systems, according to the range corresponding to the flow rate of liquid flow meters.

IN-LINE and COMBI-FLOW filters, regardless of the design features, thermal flow meters and gas flow regulators are sensitive to contamination. In order to extend the service life of the device, it is important to be sure that there are no mechanical impurities in the flow of gas supplied to the device. Filters are designed for such cleaning and are mounted at the inlet of the device.

Gas mixing chambers. There is a growing need for special gas mixtures. Creating homogeneous gas mixtures is not just a matter of combining two or more gas streams together. For example, if you need to dilute a gas flow of 1 ml/min with a flow of 10 l/min, then you are unlikely to get a homogeneous mixture if you do not use the appropriate mixing chamber.

BRIGHT. Compact display and control systems for mass flow and pressure meters and regulators.
B1 - IP40 reading and control module
B2 - IP40 reader and control device in combination with mounting kit
B3 - IP65 reading and control
B4 - A reading and control device with a degree of protection of IP65 in combination with a mounting kit

Compact PiPS power supplies for flow and pressure meters/regulators

Power supplies E-5700. Low-cost power supplies/control and display systems. They work with analog devices, the indication is as a percentage of the full scale.

E-7000 power supplies. Multifunctional digital power supplies/control and display systems. They allow you to work with both analog and digital devices. They can work in a FLOWBUS-based network.

E-8000 power supplies. Multifunctional digital display, control and power systems of the new generation with LCD screen

Accessories for sensor systems (cables, connectors. connecting cords) of FLOW-BUS, MODBUS, PROFIBUS, ETHERCAT systems.

Bronkhorst FlowWare software.